Scanning calorimeter (DSC)

The use of a scanning calorimeter (DSC) to monitor heat-induced or cooling-induced processes in the test material and track phase transformation processes.

Thermal imaging inspections

Thermal camera tests using the FLIR SC 660 type thermal camera. High-resolution still or moving thermal images for thermotechnical analyses of high-temperature equipment, fault detection, and building energy assessments.

Scanning microscopic examinations

Heating microscope tests using the SYLAB IF-2000G heating microscope. Examination of the melting and softening properties of fuel ashes and determination of the softening parameters of ceramics at temperatures up to 1550 °C.

Indoor flash point determination

Determination of flash point in closed vessels using the Pensky-Martens apparatus. Determination of the closed-cup flash point of liquids, mineral oil products, etc., with the help of the Pensky-Martens apparatus.

Dilatometric test, thermal expansion test

Dilatometric and thermal expansion testing using the Setaram SETSYS 24 thermoanalytical equipment. Detailed analysis of thermal expansion of ceramics, metals, and refractory materials based on dilatometric properties.

Shooting with a dashcam

Recording high-speed videos using the FastCAM Mini UX100 camera. Resolution: 1280 x 1024 pixels, frame rate: 4000 fps, enabling detailed capture and analysis of high-speed events.

Spectrophotometric studies

Spectrophotometric analyses using the VWR UV-6300PC instrument. Determination of inorganic and organic compounds, including phosphate, nitrate, ammonia, and phenol content, among others.

Measurement of atmospheric dust concentrations

Measurement of atmospheric dust concentration using the TSI DustTrak instrument. It is used to measure PM10 and PM2.5 particles in the air, providing accurate determination of dust concentration.

Powder concentration determination

Determination of dust concentration using the Dekati PM10 impactor and S-20 cyclone probe. Measurement of total dust concentration as well as PM10 and PM2.5 particles in gases flowing through channels.

Polymer sludge testing

The polymer melt flow indexer is essential for assessing the processability of polymer materials, measuring viscosity at a specified temperature and load.